V mount set up measurements

[Chris shrewsbury]

Hi everyone I am going to buy the bits separately to make a V mount set up. I wonderd if anyone else has done this and if so do they have the measurements of there intercooler width and height and same for radiator. And what would be really helpful any pictures they could whatts app me. Thanks for looking

 

[SiH]

I did it with a Koyo and generic eBay IC, but afraid I don't have the measurements! Needed a lot of work by a skilled TIGsman to make it work though.
It sort of works with the Koyo N Flo for the FD, but the lower outlet was VERY low and exposed. Not ideal.

Also have a single turbo and associated manifold which makes that bit a lot easier!

 

[Chris shrewsbury]

I did it with a Koyo and generic eBay IC, but afraid I don't have the measurements! Needed a lot of work by a skilled TIGsman to make it work though.
It sort of works with the Koyo N Flo for the FD, but the lower outlet was VERY low and exposed. Not ideal.

Also have a single turbo and associated manifold which makes that bit a lot easier!

Hi thanks for reply I have a very good freind who owns his own shop that’s a fabricator on modified cars who tigs amazing. That’s what I was worried about is the inlet and outlet pipes I guess a radiator that has the both on top would help I am going single turbo aswell I am having V mount set up on manifold and turbo just to help with adjustment plus no gasket to blow. I am thinking the same as you use a eBay intercooler but it’s the rad I am struggling with due to the where the inlet and outlet goes. I wonderd if anyone knows a radiator that works day off a different veichle. Appreciate your help mate