Japan racing jr12

[Caine_1989]

Hi I'm looking into getting the wheels in the title jr12 they will be 18x9 et25 front 18x10 et 25 rears just seeing if anyone can give me any advice to whether or not I'd need to roll the arches or if be ok I've never fitted new wheels to an fd before so any help wouldn't be apprciated

 

[Myocardial Infarction]

18x9 et25 fronts will see you rolling the front arches, I have 17x9 et30 with 245/40 and they've caught the lip under heavy compression.

 

[Caine_1989]

18x9 et25 fronts will see you rolling the front arches, I have 17x9 et30 with 245/40 and they've caught the lip under heavy compression.

I'm fitting some concept 7 front fèed arches so hopefully that will stop the running any idea on the rears

 

[Chris_Ward]

This is mine:

This is 18 x 9.5 ET22 all round. I had to roll my arches front and rear, though this was with a big drop, I did subsequently raise it up afterwards as scrapping the exhaust got boring very quickly.

 

[Myocardial Infarction]

I'm fitting some concept 7 front fèed arches so hopefully that will stop the running any idea on the rears

They're like 20 or 25mm wider than stock so I'd say the fronts should fit fine and allow a little wider rubber

 

[Caine_1989]

Cool so for the rears I'm.going to have to either get them rolled to fit the wheels or get some wider rears arches