FEED style intank anti-slosh baffle tanks group buy

[Stix44]

Hi,

*Update- Julian has confirmed these will be £125+p&p if you want to secure your baffle please contact Julian directly on +44 7920 401794. You will need to bank transfer a deposit of £35 to secure your place*

Following a discussion in the RX7ribe whatsapp group it was suggested that someone post up here.

If we can get enough people together Julian is going to make a batch of FEED style intank anti-slosh baffle tanks, Julian previously sold these on the FDUK forum.

Here is what the finished product looks like:



The minimum number to place an order is 5 but the more people interested the better. The estimated lead time once the order is placed is around 6 weeks.

The price is currently estimated around the £120 mark but Julian is going to work out a more exact price including any volume discounts soon.

the current list is:

1. Stix
2. David H
3. Andrew 'Welshkid'
4. Sturneyrx7
5. JE96
6. Macer
7. Jack
8. Ste_Collins94
9. BenLewisMAV
10. hy_cupcakes
11. SchuKingR
12.
13.
14.
15.

If your interested just reply to this thread an I will add you to the list.

thanks

Stix.

 

[Sturneyrx7]

Interested

 

[Stix44]

Interested

I will add you to the list

 

[JE96]

Interested

 

[Stix44]

Interested

I will add you to the list

 

[Macer]

Interested

 

[jdmr_neil]

I got one one in the fduk group buy and they certainly work

 

[Stix44]

Interested

I will add you to the list

 

[Stix44]

I got one one in the fduk group buy and they certainly work

Thanks for the feedback! Good to know.

 

[jack.am]

1. Stix
2. David H
3. Andrew 'Welshkid'
4. Sturneyrx7
5. JE96
6. Macer
7. Jack
8.
9.
10.

 

[Stecollins_94]

Stick my name down please, I’m interested

 

[Stecollins_94]

@Robbo80 This would benefit you for sure man, unless you already have something similar

 

[Tangelos]

@nukinukinuki this is what you need (and what I upgraded to)

 

[Gunnytron]

How are these secured?

 

[jdmr_neil]

How are these secured?

The pump hanger holds it in place. You only need to remove the level float and mount it on the baffle tank then its a drop in. They do take a little fiddling with the pump sock to ensure it doesnt prevent the flap from fully opening but its nothing difficult. Also because i have the 044 which is slightly larger, i adjusted the mounting for a nice flush fit when its all bolted down. Oh and remember to earth it just as a pre-caution.

There was a decent fitting thread ( Joe) but was possibly lost on fduk.

 

[Efini_Dave]

How are these secured?

I found this https://www.rx7club.com/3rd-generat.../feed-tank-fuel-collector-help-needed-876090/

I' am ordering one but no idea on how it fits yet but I am sure I'll work it out

 

[Gunnytron]

The pump hanger holds it in place. You only need to remove the level float and mount it on the baffle tank then its a drop in. They do take a little fiddling with the pump sock to ensure it doesnt prevent the flap from fully opening but its nothing difficult. Also because i have the 044 which is slightly larger, i adjusted the mounting for a nice flush fit when its all bolted down. Oh and remember to earth it just as a pre-caution.

There was a decent fitting thread ( Joe) but was possibly lost on fduk.

I've got an 044 also. I did wonder if my fuel.sock would fit.

 

[Tangelos]

Once the tank is in the fuel tank, the hanger holds it in place. It seems counterintuitive but there’s no way the FEED tank can move from its spot. It’s a bit weird to get in though, I had to put both tanks in and then install the fuel level sensor after the tank was in. I use a walbro 450 pump with no problems

 

[Efini_Dave]

I might fit an 044 whilst I am at it then

 

[Stix44]

Stick my name down please, I’m interested

Done buddy