Single Turbo Loom Conversion

[Yugen]

Hey guys! Does anyone have any links to something that tells you what to delete on the engine loom for a single turbo conversion? Cheers!

 

[Brendan]

I originally followed this

How To: Single Turbo Harness - RX7Club.com - Mazda RX7 Forum

3rd Generation Specific (1993-2002) - How To: Single Turbo Harness - Before you begin, familiarize yourself with the harness. Know what plugs you want to remove. Then read the forums and determine if you still want to remove them. Finally, I take no responsibility if you mess up your harness...

www.rx7club.com

But ended up having to rewire the boost solenoid and then had to do it again to add the iacv

 

[Yugen]

Mines a '94, I think it's different, does anyone have a '94 wiring diagram I could use? Thank you!

 

[Brendan]

Mines a '94, I think it's different, does anyone have a '94 wiring diagram I could use? Thank you!

Majority of it should be the same, you will need to keep the same bits and the rest is not used. Depending on ECU you will need the iacv. What ever you do add a few extra wires through as spares if you decide to add anything at a later date

 

[Yugen]

Majority of it should be the same, you will need to keep the same bits and the rest is not used. Depending on ECU you will need the iacv. What ever you do add a few extra wires through as spares if you decide to add anything at a later date

Yeah we found one! Just figuring out the AVS on the guide